BAZALT FIBER AND ITS COMPOSITIONS: GENERAL VIEW

Main Article Content

NO‘MONOV MASHRABJON BAHODIRJON O‘G‘LI, AKBAROV JAHONGIR NE’MATJON O‘G‘LI, ABDULLAYEV IKROMJON, TOʻLQINOV IQBOLJON MAXAMAD OʻGʻLI

Abstract

This article examines the chemical composition, mechanical properties and durability of basalt fiber. Basalt fiber properties such as temperature change and adhesion are also discussed. In terms of cost effectiveness, basalt polymer is better than carbon fiber reinforced glass polymer, and compared to glass fiber reinforced glass polymer, it has better strength and has become a good alternative to other fiber materials. Basalt polymer has high flexural strength and better adhesion compared to glass polymer, the mechanical and thermal properties of basalt polymer decrease significantly with increasing temperature.

Article Details

How to Cite
NO‘MONOV MASHRABJON BAHODIRJON O‘G‘LI, AKBAROV JAHONGIR NE’MATJON O‘G‘LI, ABDULLAYEV IKROMJON, TOʻLQINOV IQBOLJON MAXAMAD OʻGʻLI. “BAZALT FIBER AND ITS COMPOSITIONS: GENERAL VIEW”. HOLDERS OF REASON, vol. 4, no. 1, Mar. 2024, pp. 36-42, https://sciencepromotion.uz/index.php/HOLDERS_OF_REASON/article/view/1372.
Section
Articles

References

Akramov, A. A. U., & Nomonov, M. B. U. (2022). Improving the Efficiency Account Hydraulic of Water Supply Sprinklers. Central Asian Journal of Theoretical and Applied Science, 3(6), 364-370.

Achilov, A. N., Payazov, M. M., Akbarov, Z. N., & Madaminov, O. B. (2020). Issues to improving the social situation of the population of the republic of Uzbekistan and the qualitative organization of municipal services. ISJ Theoretical & Applied Science, 5(85), 708-713.

Абдуллаев, И. А. (2023). ТЕХНОЛОГИЧЕСКАЯ СХЕМА ПРОИЗВОДСТВА СУХИХ СТРОИТЕЛЬНЫХ СМЕСЕЙ ДЛЯ ТЕПЛОИЗОЛЯЦИИ СТЕН В КОЛОДЦЕВОЙ КЛАДКЕ. International journal of advanced research in education, technology and management, 2(11).

Абдуллаев, И. А. (2020). ПРИМЕНЕНИЕ ЯЧЕИСТОБЕТОННЫХ ИЗДЕЛИЙ В ГРАЖДАНСКОМ СТРОИТЕЛЬСТВЕ. V Международный студенческий строительный форум-2020, 147-150.

Абдуллаев, И. А. (2022). ИЗДЕЛИЯ, ИЗГОТАВЛИВАЕМЫЕ НА ПРЕДПРИЯТИИ Г. ФЕРГАНА. Экономика и социум, (4-1 (95)), 212-215.

Абдуллаев, И. А. (2022). ИЗДЕЛИЯ, ИЗГОТАВЛИВАЕМЫЕ НА ПРЕДПРИЯТИИ Г. ФЕРГАНА. Экономика и социум, (4-1 (95)), 212-215.

Абдуллаев, И. А. (2022). ПРОЕКТИРОВАНИЕ СОСТАВА ХОЛОДНОГО АСФАЛЬТОБЕТОНА. Экономика и социум, (3-2 (94)), 362-366.

Dilshodbek o‘g, M. A. A., & Kaxramanovich, S. A. (2023). LOK-BO’YOQ MAXSULOTLARI HUSUSIYATLARI VA TURLARI. O'ZBEKISTONDA FANLARARO INNOVATSIYALAR VA ILMIY TADQIQOTLAR JURNALI, 2(15), 577-581.

Ross, A. 2006. “Basalt fibers: alternative to glass?” Compos Technol; 12:44–8.

Dhand, V., Mittal, G., Rhee, K.Y., Park S.J. and Hui, D. 2015, “A short review on basalt fiber reinforced polymer composites”, Composites: Part B 73:166–180.

Sarasini, F., Tirillò, J., Ferrante, L., Valente, M., Valente, T. and Lampani, L. 2014, “Dropweight impact behaviour of woven hybrid basalt–carbon/epoxy composites”. Compos Part B – Eng;59:204–20

Park, J. M., Shin, W. G. and Yoon, D. J. 1999, “A study of interfacial aspects of epoxy-based composites reinforced with dual basalt and SiC fibres by means of the fragmentation and acoustic emission techniques”. Compos Sci Technol,59(3):355–70.

Ramazonovich, Nokhudjayev Fayzulla, et al. "Resource-saving manufacturing technologies and thermal hardening of machine parts and tool." International Journal of Mechatronics and Applied Mechanics (IJOMAM) 9 (2021): 137-145.

Usmonov, J. M., et al. "Aluminum-based composition materials for processing aluminum scrap." ACADEMICIA: An International Multidisciplinary Research Journal 11.8 (2021): 590-595.

Косимова, Малохат Каримовна, Жасурбек Мўминалиевич Усмонов, and Раьнохон Косимжоновна Юсупова. "Результаты исследования толщины контактно приваренного слоя из сформованного порошкового композиционного материала." Российский электронный научный журнал 7 (2014): 22-29.

Убайдуллаев, М. М., et al. "Электр двигателларда қўлланиладиган углеграфитли материалларни ишлаб чиқариш технологиясини тахлил қилиш." Композицион материаллар”, Тошкент ш (2021): 103-107.

Usmonov, Jasurbek. "PREPARATION OF ALUMINUM POWDER BASIC RESEARCH SAMPLES AND EFFECT OF POWDER PARTICLE SIZE AND COOKING TEMPERATURE ON THE MECHANICAL PROPERTIES OF SAMPLES." American Journal Of Social Sciences And Humanity Research 3.11 (2023): 226-232.

Xusanboy, To‘ychiyev, and Usmonov Jasurbek. "YO ‘L QURILISHIDA FOYDALANILADIGAN YO ‘L FREZASI ISHCHI JIHOZLARINING ISHLASH HOLATI." Innovations in Technology and Science Education 2.17 (2023): 202-209.

Akbarov, J. N., M. B. No‘monov, and I. A. Abdullayev. "INVESTIGATION OF FACILITIES USING PARTIAL CLEANING OF WATER FROM SLUDGE BEFORE WATER COLLECTION." HOLDERS OF REASON 3.1 (2023): 672-679.

Akbarov, J. N., M. B. No‘monov, and I. A. Abdullayev. "STUDY OF TYPES OF AUTONOMOUS SEWAGE SYSTEMS ACCORDING TO WASTEWATER TREATMENT METHOD." HOLDERS OF REASON 3.1 (2023): 662-667.

Akbarov, J. N., et al. "QUALITY AND QUANTITATIVE COMPOSITION OF SCREWS RESEARCH." HOLDERS OF REASON 3.1 (2023): 668-671.

Akbarov, J. N., M. B. No‘monov, and I. A. Abdullayev. "STUDY OF CENTRIFUGE STRUCTURES AND CLASSIFICATION OF MATERIALS." HOLDERS OF REASON 3.1 (2023): 655-661.

Aminjanovich, Abdullayev Ikromjon, and Xasanov Davlatbek Davronbek o‘g‘li. "Beton va qorishmalarning xususiyatlariga qo'shimchalarning ta'siri." HOLDERS OF REASON 1.1 (2023): 667-670.

15.Бахромов, Махмуд, and Давлатбек Хасанов. "ТЎКМА ГРУНТЛАРДА ЗАМИН ВА ПОЙДЕВОРЛАР ҚУРИЛИШИ." Евразийский журнал академических исследований 2.6 (2022): 353-360.

16.Xasanov, D., and Q. Xolmirzayev. "ECONOMIC FARM DESIGN." Science and Innovation 1.4 (2022): 68-75.

17.Xasanov, D., and Q. Xolmirzayev. "TEJAMKOR FERMALARNI LOYIHALASH." Science and innovation 1.A4 (2022): 68-75.