THREAD ROLLING

Authors

  • Urinov Nasillo Fayzilloevich, Saidova Mukhabbat Khamroevna, Dustmurodov Doniyor Zafarovich candidate of technical sciences, associated professor, associated professor, student of group 516-23 МТА Bukhara Engineering and Technology Institute

Abstract

One of the conditions for thread formation, on which the accuracy of the main dimensions and the shape of the threaded profile of bolts depends, is the formation of threads taking into account the average values of the workpiece diameter and mechanical characteristics, as well as the parameters of rolling modes. From this we can conclude that fluctuations in the diameter of the workpiece and pressure in the hydraulic circuit (in profile rolling machines with hydraulic tool feed) have a major influence on the spread of bolt thread sizes.

References

Andreev A.M. Graphic-analytical method for determining radial forces of thread rolling [Text] // A.M. Andreev, A.Z. Zhuravlev, E.P. Lugovoi

Zenkevich O.K. Finite element method in technology [Text] / O.K. Zenkevich / M.: Mir, 1975. - 541 p.

Miropolsky Yu.A. Rolling of threads and profiles [Text] / Yu.A. Miropolsky, E.P. Lugovoy / M.: Mechanical Engineering. - 1976. - 175 p.

Fayzilloevich, Urinov Nasillo, and Abdullaeva Dilnavoz Khusniddinovna. "Analysis of Log-Files of Technological Devices." Miasto Przyszłości 28 (2022): 391-394.

Urinov, Nasillo Fayzilloevich, and Abdullaeva Dilnavoz Khusniddinovna. "Software-implemented controller and its functional purpose." Academicia Globe 3.02 (2022): 78-81.

Ўринов, Н. Ф., and Д. Х. Абдуллаева. "ПРОБЛЕМА ПОСТРОЕНИЯ ПРОГРАММНЫХ СИСТЕМ ЛОГИЧЕСКОГО УПРАВЛЕНИЯ ТЕХНОЛОГИЧЕСКИМ ОБОРУДОВАНИЕМ." PEDAGOGS jurnali 3.2 (2022): 27-30.

Iqboljon, Bilolxon. "METHODOLOGY FOR CREATING ANIMATED ELETRON TEXTBOOKS FOR TOPICS THAT ARE DIFFICULT TO MASTER FROM DRAWING GEOMETRY." E Conference Zone. 2022.

Нурматов, Сардорбек Хасанбой Ўғли, et al. "БАРБОТАЖЛИ АБСОРБЦИЯ ҚУРИЛМАСИДА ГАЗ ЁСТИҒИНИ ТАДҚИҚ ҚИЛИШ УСУЛИ." Строительство и образование 4.5-6 (2023): 287-295.

Urinov, Nasillo Fayzilloevich, and Abdullaeva Dilnavoz Khusniddinovna. "Functional model of a software-implemented controller." European Scholar Journal 2.5 (2021): 199-202.

Ўринов, Насилло Файзиллоевич, Дилнавоз Ҳусниддиновна Абдуллаева, and Журабек Маликович Жураев. "СИСТЕМЫ ЛОГИЧЕСКОГО УПРАВЛЕНИЯ НА СОВРЕМЕННОМ ЭТАПЕ." Актуальные вопросы и перспективы развития науки, техники и технологии. 2021.

Abrorov, Akbar, et al. "Mathematical model of hardening the disk-shaped saw teeth with laser beams." Journal of Physics: Conference Series. Vol. 2373. No. 2. IOP Publishing, 2022.

Nezhmetdinov, R. A., et al. "International Multi-Conference on Industrial Engineering and Modern Technologies." (2020).

Urinov, Nasillo, et al. "Research of structural and mechanical properties of molded macaroni foods as a cutting object." IOP Conference Series: Earth and Environmental Science. Vol. 839. No. 3. IOP Publishing, 2021.

Urinov, Nasillo, et al. "Research of deformation properties of food material under the influence of normal stresses." IOP Conference Series: Earth and Environmental Science. Vol. 848. No. 1. IOP Publishing, 2021.

Abrorov, Akbar, et al. "Vacuum installation of technology of deep ion-plasmic nitriding disc saw of fiber separating machines." International Journal of Advanced Research in Science, Engineering and Technology 7.1 (2020): 12406-12409.

Akhmedov, Sharif, et al. "Determination of loads of blast wave on aboveground and underground structures." E3S Web of Conferences. Vol. 390. EDP Sciences, 2023.

Уринов, Н. Ф., and Б. Б. Бафоев. "РАЗРАБОТКА ТРЕБОВАНИЙ К ПОКРЫТИЯМ ДЛЯ РЕЖУЩЕГО ИНСТРУМЕНТА ИЗ КОМПОЗИЦИОННОЙ КЕРАМИКИ." PEDAGOGS jurnali 3.2 (2022): 86-89.

Fayzilloevich, Urinov Nasillo, and Dubrovets Lyudmila Vladimirovna. "Control of force parameters during processing diamond grinding." Academicia Globe 3.02 (2022): 73-77.

Abrorov, A., et al. "Physical essence and process of laser hardening of circular saw of a saw cylinder." International Journal of Advanced Research in Science, Engineering and Technology 7.1 (2020): 12418-21.

Fayzilloevich, Urinov Nasillo, Saidova Mukhabbat Hamroevna, and Yuldoshev Mirzobek Nurilloevich. "Analysis of Types of Optimization of Technological Processes of Manufacture of Parts." International Journal of Human Computing Studies 3.8 (2021): 22-26.

Urinov, N. F., et al. "Results of formation of knife blade." IOP Conference Series: Materials Science and Engineering. Vol. 734. No. 1. IOP Publishing, 2020.

Barakaev, N., et al. "Interaction of movable operating elements of cutting machines with material being cut." IOP Conference Series: Earth and Environmental Science. Vol. 839. No. 3. IOP Publishing, 2021.

Kasimov, B. M., et al. "Calculation models for the assessment of deflected mode in the surface layer of parts during surface plastic deformation by running and smoothing." Современные инновации, системы и технологии 2.4 (2022): 0324-0330.

Fayzilloevich, Urinov Nasillo, and Dubrovets Lyudmila Vladimirovna. "Parametric Optimization of Technological Processes." Eurasian Journal of Research, Development and Innovation 13 (2022): 17-22.

Saidova, Mukhabbat, Nodir Urinov, and Leonid Schwarzburg. "Development of the model of automatic control of energy intensity of technological processes and its application." IOP Conference Series: Earth and Environmental Science. Vol. 839. No. 5. IOP Publishing, 2021.

Published

2024-03-30

How to Cite

Urinov Nasillo Fayzilloevich, Saidova Mukhabbat Khamroevna, Dustmurodov Doniyor Zafarovich. “THREAD ROLLING”. Science Promotion, vol. 7, no. 1, Mar. 2024, pp. 66-70, https://sciencepromotion.uz/index.php/sp/article/view/1384.